Melt and Pour Soap Base LOW SWEAT COCONUT CP Discontinued


SFIC Low Sweat Coconut CP Melt and Pour Soap Base SLS Free

Low sweat soap looks like Cold Process soap and is best known to be a low-sweat formula that will help prevent beads of moisture forming on soap bars, while still being made with natural vegetable skin care oils and moisturizers for maximum skin benefits.  

INCI: Coconut Oil Palm Oil Safflower Oil Glycerine (kosher, of vegetable origin) Purified Water Sodium Hydroxide (saponifying agent) Sorbitol, Propylene Glycol (made from vegetable glycerine) Sorbitan oleate (emulsifier) Oat protein & Titanium Dioxide (mineral whitener used in opaque soaps)

The palm oil is RSPO certified sustainably sourced.

Directions: Carefully slice soap base into small 1" pieces and place in microwave safe container. Heat on low at 30-second intervals. Stir between intervals until liquid. Handle hot soap carefully as it may burn the skin. Soap can also be melted in a double boiler which is the preferred method to get an even melt.

Depending on how strong you like your scented soap to be – a general rule of thumb or guideline is roughly 1 teaspoon (or more) per pound of soap. If using essential oils or fragrance oils – the strength of the scents vary from oil to oil. Try starting with 1 teaspoon per pound of soap base and work your way up.
Note: If the essential oil or fragrance oil has a colour to it – may give a slight colour or hue to the soap.

MOLD: Stir in your desired colour, & scent, and skin safe additives. Pour into a mold. We recommend not filling the mold to the top for easier release. Spritz soap surface with rubbing alcohol to remove bubbles. Let cool until solidified

CAUTION: Melted soap is hot! For ages 15 and older

This is an opaque soap base. Do not overheat or microwave soap bases as high heat will ruin the lather and make the soap brittle. Fingerprints can be removed from soap with a little of alcohol. 1 pound (0.45 kg) yields 5 to 6 average bars. An important tip when pouring into soap molds, don't fill the mold to the very top to allow your soap to release better.

Coconut oil 10-30% code 2
Palm Oil 10-30% code 2
glycerine 10-30% code 2
Purified water 10-30% code 2
sodium hydroxide 3 - 10% code 3
Propylene glycol 3 - 10% code 3
Safflower Oil 3-10% code 3
sorbitol 3-10% code 3
sorbitan Oleate 3-10% code 3
Oat Protein 1 - 3% code 4
Titanium dioxide 0.3 - 1% code 5
CAUTION: Melted soap is hot!  For ages 15 and older.

Customer Reviews

No reviews yet